
INTRODUCING THE NEWEST MEMBER OF OUR FAMILY
JONES-SCANLON BIG REDS
We have now catered for what’s been greatly lacking in far field monitoring systems:
- A truly new dimension in mixing/dynamics and imaging
- Relentless frequency response at loud and soft levels
- Next level “sensory perception” clarity/punch/tightness with truly intoxicating accuracy!
- Replace your big’s in the studio with these and wonder if you’ll ever use your smalls again
It seemed a natural progression for us to cater for the very loud and fat far field monitors commonly used in the wall or on stands in large format studio mixing rooms.
“They may be in the wall but they sound like headphones”
“The Big Reds have to be heard to be believed”
Now you don’t have to adjust your control room to cater for the imperfection of the classic far field monitors. You can fine tune your control room acoustics for accuracy, not for the resonance of honky far field speakers.

- Stunning frequency response which you need to experience to believe
- Incredible Accuracy in phase with world leading transient response
- Allowing hyper accurate compression settings within the mix
- Faster mix times
- Less mix changes
- Virtually no cross referencing required
Cabinet Specs
- Finish – Stunning 2 Pak/Matte Automotive paint finish with high gloss clear coats
- Standard finish is a high gloss red face with the rest of the monitor finished in charcoal matte clear
- Available in custom colours. Match your décor, order your preferred colour
- Woodwork 18mm MDF
Cabinet Specs – for each cabinet:
- Power – 2000 Watts RMS powered
- Channel 1 Drives 1 x 10” Woofer – 500 Watts RMS @4ohms
- Channel 2 Drives 1 x 10” Woofer – 500 Watts RMS @4ohms
- Channel 3 Drives Mid Range – 500 Watts RMS @ 4ohms
- Channel 4 Drives Tweeter – 500 Watts RMS @ 8ohms
- Power Amps – State of the art D Class switch mode power amps with heat sink plates mounted into the rear of the cabinet
- Power Amp frequency – 20 Hz – 20 kHz
- Cabinet tuning – 35 Hz to 20KHz
- Cabinet response – Half loudness Graphed down to 28Hz
- HPF switch at 35 Hz for high level monitoring applications
- Drivers – 2 custom made Wayne Jones Audio 10” drivers with Aluminium cast frames, specially formulated Eucalyptus cone pulp, Kevlar impregnated cones.
- Voice coil – 3″
- Magnet – Massive Ferrite
- Midrange 6.5” Ferrite magnet
- Tweeter – Machined Aluminium 1.46″ Voice coil, Kapton
- Crossover points – 160Hz 1950 Hz 2250 Hz
- Control plates – Black Steel
- Universal Mains Power in – Standard IEC
DSP & Control Plate Features:
- Inputs – XLR balanced & SPDIF digital inputs
- DSP – 192kHz SHARC processing
- USB connector for WJ Audio use only. Used for software updates
- 3 Toggle switches with selections
- SPDIF – Left / Right & XLR analogue
- 2 Room EQ switches:
- Room 1 – Inactive for future developments
- Room 2 – Pre-set with 98 Hz boost
- Room 3 – Inactive for future developments
- Room 4 – 35Hz HPF
- Centre position is Flat – Undeniably accurate – If your room is flat so are these speakers
- LED on Control Panel for power operation
Single Monitor Dimensions:
- H60 x W64.5 x D49.5 cm Approx
- 23.6 x 25.4 x 19.5 inches
Shipping Dimensions & Weights:
- Carton – Double thickness cartons lined with high density road-case foam for ultimate protection.
- H67 x W70 x D56 cm = Total 263 cm
- 60 kg /133 lbs
The Design Team
Ordering
As these are custom & hand made in Australia. If not in stock there could be a wait time of up to 8 weeks from time of order
Payment
50% required at time of order with balance payable when ready to ship
International shipping is by DHL Express
Shipping & local duties & taxes are the customers responsibility
Warranty is 3 year limited on all parts & Labour